2014

All-Bright 2010 Series Regular Resolution Power Meter, there are 3 voltage ranges, 3 current ranges, and 9 watt ranges selectable. With proper resolution, All-Bright offers you excellent quality and most economic solution for power measuring. It can be widely used in a variety of fields from home appliance, office automatic machines, to facilities of the industry. Flexible and user friendly design, easy for operation, All-Bright sees your needs.

．Basic ±0.1% accuracy.
．V, A, W true RMS measurement.
．Provides auto and manual ranging for both voltage and current measurements.
．Provides autoranging for measurements of frequency.
．4-1/2 digits A/D converter is used, provides high accuracy, resolution, and stability.
．Provides 3 multi-function displays with 7 selectable measurement modes (Wrms, Arms, Wrms, PF, VA, VAR, Hz).

．3 ranges for voltage measurements, 3 ranges for current measurements, and 9 ranges for Watt measurements.
．Automatically store the latest operating settings before powered-off. Resume the settings on the next power-on.
．Peak current over-range warning.
　　*** Features listed below are only for Model 2011/14/15
．Provides PT and CT ratio-multiplication function (between 0.0010 and 1000.0).
．Independent comparison function for each display.
．Front Panel Store / Recall Function
．Average Display Function
．Display Hold Function
．Standard RS-232C Interface

Item	Voltage	Current
Input Circuit Type	Resistive voltage divider	Shunt input
Rated Input (range rms)	2011/15: 30/300/600V 2012/14: 20/200/600V	2011: 30mA/300mA/3A 2012/14: 200mA/2A/20A 2015: 500mA/5A/50A
Input Impedance	Approx. 1MΩ	2011: Approx. 66.7 mΩ 2012/14: Approx. 10mΩ 2015: Approx. 4 mΩ
Max. Input (at 50/60Hz)	600Vrms	2011: 3Arms/ 9Apeak 2012/14: 20Arms / 50Apeak 2015: 50Arms/125Apeak
Range Selection	2012 : Auto Range, 2011/14/15 : Manual or Auto with LED Indicated
A/D Conversion	4 1/2 Digits ADC
Input Filter	2012 : None, 2011/14/15 : 1KHz low pass Filter
Input Terminal	2011/12/14: Screw Terminal, 2015: Binding Post Terminal

Item	Voltage / Current	Effective Power
Frequency Range	2011/12: 10Hz to 20KHz, 2014 : 10Hz to 50KHz, 2015: 10Hz to 5KHz
Crest Factor	“3” at Rated Input
Operating Principle	Ture rms
Display Accuracy 10Hz to 45Hz 45Hz to 66Hz 66Hz to 2KHz 2KHz to 10KHz 10KHz to 50KHz	0.15% of rng + 0.2% of rdg 0.1% of rng + 0.1% of rdg 0.1% of rng + 0.1% of rdg 0.15% of rng + 0.2% of rdg 0.15% of rng + 0.2% of rdg+( 0.3%*(f-10KHz))	0.2% of rng + 0.2% of rdg 0.1% of rng + 0.1% of rdg 0.12% of rng + 0.1% of rdg 0.15% of rng + 0.2% of rdg+( 0.3%(f-2KHz)) 0.15% of rng + 0.2% of rdg+( 0.5%(f-10KHz))
Effective Input Range	5% to 100% of Set Range
Temp. Coefficient	±0.05% of Range/℃
Display Update Rate	3.3 times/sec
Display Digits	4 1/2 Digits (20000 counts)	Full 4 Digits (10000 counts)

Operating Principle	Reciprocal Counting Method	Display Digits	Full 5 digits display on each frequency
Display Range	10.000Hz to 100.00KHz	Display Resolution	1mHz to 10Hz
Display Accuracy	± (0.006%+5d)	Frequency Range	10Hz to 100KHz
Measurement Range	5% to 100% of Rated Range

Item	Wrms	VA	VAR	PF
Computation	W	VA=V*A	VAR=	PF=W/(V*A)
Computation Range	Depends on the Selected V and A Range			-1 to 0 to 1
Computation Accuracy	----	±0.05% of VA Range	±0.05% of VA Range	±0.001
Maximum Display	9999	9999	9999	±1.000

Display Scaling Function	Reassign Ratio: 0.0010 to 1000.0
Significant Digits	Selected Automatically According to Significant Digits in the Voltage and Current
Averaging Function	Display Computing Average (Fixed 3 Measured)
Compare Function	Independent Compare with HI/GO/LO LED Display for Each Display

Interface	Standard RS-232C Interface on model 2011/14/15
Power Supply	AC 115V/230V±10%, 60Hz/50Hz Switch Selectable
Warm-up Time	Approx. 30min.
Operation Humidity / Temperature Range	80% R.H. (+5℃ ~ 30℃), 50% R.H. (+31℃ ~ 40℃)
Storage Temperature / Humidity Range	-10 ~ 70℃, <80% R.H.
Accessories	Power Cord x 1, Operation Manual x 1