66000A Modular Power System

Agilent 6692A 6600 W系統電源供應器，60 V，110 A

High density: eight slots in 7 inches of rack space
Output sequencing
Low ripple and noise
High-accuracy read-back of voltage and current over GPIB

Standard Commands for Programmable Instruments (SCPI)

Optional keyboard and display unit
Serial link to connect two mainframes at one GPIB address
Optional isolation and polarity-reversal relays
Built-in self-test
For complete details, click on the Data Sheet link
　

The Agilent 66000A modular power system simplifies test-system assembly, cabling programming, debugging, and operation. It is ideal for ATE and production test environments, where it can supply bias power and stimulus to subassemblies and final products. The Agilent modular power system saves rack space. The 66000A 7-in high (4-EIA units) mainframe can accommodate up to eight dc power modules.
　

Modular Power System: 1200 W per mainframe GPIB
Specifications (at 0° to 55°C unless otherwise specified)		66101A	66102A	66103A	66104A	66105A	66106A
Output ratings at 40°C
Output voltage		0 to 8 V	0 to 20 V	0 to 35 V	0 to 60 V	0 to 120 V	0 to 200 V
Output current		0 to 16 A	0 to 7.5 A	0 to 4.5 A	0 to 2.5 A	0 to 1.25 A	0 to 0.75 A
Maximum power		128 W	150 W	150 W	150 W	150 W	150 W

Programming accuracy at 25°C ±5°C
Voltage	0.03% +	3 mV	8 mV	13 mV	27 mV	54 mV	90 mV
Current	0.03% +	6 mA	3 mA	2 mA	1.2 mA	0.6 mA	0.4 mA

Readback accuracy (via GPIB or keyboard display at 25°C ±5°C)
Voltage	0.02%+	2 mV	5 mV	8 mV	16 mV	32 mV	54 mV
Current	0.02%+	6 mA	3 mA	2 mA	1 mA	0.6 mA	0.3 mA

Ripple and noise (20 Hz to 20 MHz)
Constant Voltage rms		2 mV	3 mV	5 mV	9 mV	18 mV	30 mV
peak-peak		5 mV	7 mV	10 mV	15 mV	25 mV	50 mV
Constant Current rms		8 mA	4 mA	2 mA	1 mA	1 mA	1 mA

Line regulation
Voltage		0.5 mV	0.5 mV	1 mV	2 mV	3 mV	5 mV
Current		0.75 mA	0.5 mA	0.3 mA	0.1 mA	50 µA	30 µA

Load regulation
Voltage		1 mV	1 mV	1 mV	2 mV	4 mV	7 mV
Current		0.5 mA	0.2 mA	0.2 mA	0.1 mA	50 µA	30 µA
Transient response time		Less than 1 ms for the output voltage to recover within 100 mV of its previous level following any step change in load current up to 10 percent of rated current
Supplemental Characteristics		(Non-warranted characteristics determined by design that are useful in applying the product)

Average resolution
Voltage		2.4 mV	5.9 mV	10.4 mV	18.0 mV	36.0 mV	60.0 mV
Current		4.6 mA	2.3 mA	1.4 mA	0.75 mA	0.39 mA	0.23 mA
Output voltage programming (OVP)		50 mV	120 mV	200 mV	375 mV	750 mV	1.25 mV
OVP accuracy		250 mV	500 mV	800 mV	1 V	1.5 V	2.5 V

Modular Power System: 1200 W per mainframe GPIB (Continued)
Specifications (at 0° to 55°C unless otherwise specified)		66101A - J03 Special Order Option	66101A - J05 Special Order Option	66102A - J05 Special Order Option	66103A - J01 Special Order Option	66103A - J02 Special Order Option

Output ratings at 40°C
Output voltage		5.7 V	12 V	15 V	37 V	40 V
Output current		20 A	12 A	10 A	4.5 A	3.6 A
Maximum power		114 W	144 W	150 W	167 W	144 W

Programming accuracy at 25°C ±5°C
Voltage	0.03% +	2.5 mV	5 mV	8 mV	13 mV	15 mV
Current	0.03% +	8 mA	6 mA	4 mA	2 mA	2 mA

Readback accuracy (via GPIB keyboard display at 25°C ±5°C)
Voltage	0.02% +	2 mV	3 mV	5 mV	8 mV	9.2 mV
Current	0.02% +	8 mA	6 mA	4 mA	2 mA	2 mA

Ripple and noise (20 Hz to 20 MHz)
Constant Voltage rms		2 mV	3 mV	3 mV	5.3 mV	6 mV
peak-peak		5 mV	7 mV	7 mV	10.6 mV	11.5 mV
Constant Current rms		10 mA	8 mA	6 mA	2 mA	2 mA

Line regulation
Voltage		0.5 mV	0.5 mV	0.5 mV	1 mV	1 mV
Current		0.5 mA	0.75 mA	0.5 mA	0.3 mA	0.3 mA

Load regulation
Voltage		1 mV	1 mV	1 mV	1 mV	1 mV
Current		1 mA	0.5 mA	0.3 mA	0.2 mA	0.2 mA
Transient response time		Less than 1 ms for the output voltage to recover within 100 mV of its previous level following any step change in load current up to 10 percent of rated current
Supplemental Characteristics		(Non-warranted characteristics determined by design that are useful in applying the product)

Average resolution
Voltage		2 mV	3.6 mV	4.5 mV	11 mV	12 mV
Current		6 mA	4.6 mA	3.1 mA	1.4 mA	1.2 mA
OVP		45 mV	75 mV	90 mV	200 mV	230 mV
OVP accuracy		250 mV	375 mV	375 mV	850 mV	920 mV

Modular Power System: 1200 W per mainframe GPIB (Continued)
Specifications (at 0° to 55°C unless otherwise specified)		66103A - J09 Special Order Option	66103A-J12 Special Order Option	66104A -J09 Special Order Option	66105A - J01 Special Order Option
Output ratings at 40°C
Output voltage		28.5 V	24 V	55 V	35 V
Output current		5.5 A	6 A	3 A	1.25 A
Maximum power		157 W	144 W	165 W	44 W

Programming accuracy at 25°C ±5°C
Voltage	0.03% +	13 mV	13 mV	25 mV	15 mV
Current	0.03% +	3 mA	3 mA	1.5 mA	0.6 mA

Readback accuracy (via GPIB or keyboard display at 25°C ±5°C)
Voltage	0.02% +	8 mV	8 mV	15 mV	9 mV
Current	0.02% +	3 mA	3 mA	1.2 mA	0.6 mA

Ripple and noise (20 Hz to 20 MHz)
Constant Voltage rms		5 mV	5 mV	9 mV	6 mV
peak-peak		10 mV	10 mV	15 mV	11.5 mV
Constant Current rms		4 mA	4 mA	1.2 mA	1 mA

Line regulation
Voltage		1 mV	1 mV	2 mV	1 mV
Current		0.3 mA	0.3 mA	0.1 mA	50 µA

Load regulation
Voltage		1 mV	1 mV	2 mV	1 mV
Current		0.2 mA	0.2 mA	0.1 mA	50 µA
Transient response time		Less than 1 ms for the output voltage to recover within 100 mV of its previous level following any step change in load current up to 10 percent of rated current
Supplemental Characteristics		(Non-warranted characteristics determined by design that are useful in applying the product)

Average resolution
Voltage		10.4 mV	8 mV	16.5 mV	2 mV
Current		2 mA	2 mA	0.9 mA	1.2 mA
OVP		200 mV	150 mV	350 mV	230 mV
OVP accuracy		800 mV	600 mV	950 mV	920 mV