HDMI Protocol Analyzer, VA-1809
Introduction
The VA-1809 is an analyzer designed specifically to inspect and measure protocol layers (data contents) in AV equipment (DVD, STB, etc.) equipped with HDMI output capabilities. HDMI is a digital interface standard for next generation television sets. With the VA-1809, you can visually confirm the operating conditions of each function of the input HDMI signal, including video display, signal timing, Info Frame, Channel Status Bit, audio values and HDCP certification.
What is more, as the VA-1809 has been designed with a wide range of uses in mind, including HDMI Repeater functions, and receiver functions, it can offer you maximum flexibility and efficiency in areas such as the development and testing of AV equipment with HDMI interfaces and equipment maintenance.
You can even run inspections and measurements at the earlier stages before compliance tests to obtain HDMI standard certification.
Features
- Monitor display of HDMI signals and overlay display of analysis details
- Detect divergence of settings, sequences, etc. from HDMI standards
- Save analysis details to memory card
- Edit EDID; be prepared for by emulating a range of different receivers
- Connect to an external monitor by converting HDMI signals into analog signals
- Use the VA-1809 as a HDMI repeater
- Separate HDMI signals into audio and vide signals
- Display actual video images on the high-definition, wide-angle 6.4 inch liquid crystal monitor
- Emulates testing items shown below in the Compliance Test for Source device
Display information: displaying input video
Displaying the timing (frequency, ranking, etc.) of input video signals from source equipment
- Info Frame
- Channel Status Bit
- Audio information
- HDCP certification status
- DDC line monitoring (planned compatibility)
Monitor functions
Compact mobile HDMI monitor
- Display input signals on an external monitor
- Be prepared for a range of different receivers using the same piece of equipment by setting EDID for each type of display
Repeater function
- Use the VA-1809 itself as a Repeater
Specifications
HDMI Input/Output
| Dot clock | 25 to 150MHz |
|---|---|
| Color space | RGB / YCbCr 4:4:4, 4:2:2 |
| Signal format | TMDS |
| HDCP | Ver. 1.1 |
| Repeater function | Available |
| Signal generator function | Not available (but possible at time of HDMI input) |
Audio Input
| Signal format | SPDIF (Coaxial) output |
|---|---|
| Sampling | Max. 192KHz x 2ch (96KHz x 8ch) |
Output
| DDC | DDC2B |
|---|---|
| E-EDID | Version 1.3 |
| CEA EDID Timing Extension | Version 3.0 |
| VGA output | D-Sub 15-Pin |
Display Information Functions
- Input video display mode
- Video signal timing display mode
- Info Frame display mode
- Channel Status Display Mode
- Audio
- HDCP
- DDC line monitoring mode
Input Setup
- HDMI or DVI
- Repeater function - enable/disable
External Memory
Compact flash adaptor/Standard 64MB (max: 256MB)
External Interface
- RS-232C, remote connector
- Ethernet 10/100BASE-T
General Specifications
| Voltage | AC100~120V / AC200~240V (50/60Hz) |
|---|---|
| Power consumption | 60W Max |
| Operating temperature range | +5 to 40℃ (non-condensing) |
| Storage temperature range | -10 to 60℃ (non-condensing) |
| Operable humidity range | 30 to 80% RH (non-condensing) |
| External dimensions | 210(W) x 133(H) x 364(D) |
| Weight | approx. 5.0Kg |