GFG-8217A Function Generator

Frequency Range:0.3Hz ~ 3MHz

Waveforms: Sine, Triangle, Square, Ramp, TTL and  CMOS  Output

External Voltage Controlled Frequency (VCF)  Function

Duty Cycle Controlled with Signal Inversion Capability

Variable DC Offset Control

Two-Step (-20dB x 2) and Variable Attenuator

Built-in 6 Digit Counter with INT./EXT. Function up to  150MHz / high resolution

LIN/LOG Sweep Mode

 

SPECIFICATIONS

Main 
 Frequency Range 0.3Hz to 3 MHz (7 ranges)
 Amplitude >10Vp-p (into 50Ω load)
 Impedance 50Ω ±10%
 Attenuator -20dB ±1dB x 2
 DC Offset <-5V ~ >5V (into 50Ω load)
 Duty Control 80% : 20% : 80% to  1MHz Continue variable
 Display 6 digit LED display
 
Sine Wave 
 Distortion <1%, 0.3Hz ~ 200kHz
 Flatness <0.3dB, 0.3Hz ~ 300kHz; <0.5dB, 300kHz ~ 3MHz
 
Triangle Wave 
 Linear >98% 0.3Hz ~ 100kHz; >95%, 100kHz ~ 3MHz
 
Square Wave 
 Symmetry ±2%, 0.3Hz ~ 100kHz
 Rise or Fall Time < 100nS at maximum output (into 50Ω load)
 
CMOS Output 
 Level 4Vpp ±1Vpp ~ 14.5Vpp ±0.5Vpp adjustable
 Rise or Fall Time <120nS
 
TTL Output 
 Level >3Vpp
 Fan Out 20 TTL load
 Rise or Fall Time <25nS
 
VCF 
 Input Voltage 0V~10V ±1V(100 : 1)
 Input Impedance 10kΩ ±10%
 
Sweep Operation 
 Sweep/Manual Switch selector
 Sweep/Rate 100 : 1 ratio max. and adjustable
 Sweep/Time 0.5sec. ~ 30sec. adjustable
 Sweep/Mode Lin./Log. switch selector
 
Frequency Counter 
 Int./Ext. Switch selector
 Range 0.3Hz ~ 3MHz (5Hz ~ 150MHz EXT.)
 Accuracy Time base accuracy +1 counter
 Time base ±20ppm (23°C ±5°C) after 30 minutes warm up
 Resolution The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz
 Input Impedance 1MΩ // 150pF
 Sensitivity <35mVrms (5Hz ~ 100MHz); <45mVrms (100MHz ~ 150MHz)
 
Power Source
AC 115V/230V ±15%, 50/60Hz
 
Accessories

Instruction manual × 1,
Power cord × 1,
GTL-101 × 2

BNC-ALLIGATOR
For:GOS-310, GVT-8010H, GFC-8131H/8270H, GFG-Series

 
Dimensions & Weight
251(W) × 91(H) × 291(D) mm, Approx. 2.2kg

Products list | brand | Model No. | Home