GOS-653G 50 MHz Oscilloscope

50 MHz, Dual Channel

Delayed Sweep

Built-in Delay Line

TV Synchronization

Z axis input

ALT Triggering Function

Hold off Function

Trigger level lock function

CH1 output

SPECIFICATIONS
CRT
Type	6-inch rectangular type with internal graticule;
	0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
Phosphor	P31
Accelerating Potential	12 kV
Illumination	Continuously adjustable
Z-axis input	Input Impedance : Approx. 5kΩ
	Sensitivity : Above 3Vp-p
	Bandwidth : DC ~ 5MHz

VERTICAL SYSTEM
Sensitivity	5mV ~ 5V/DIV ±3%, 1mV ~ 2mV/DIV ±5%
Bandwidth	DC ~ 50MHz
	DC ~ 15MHz at 1mV ~ 2mV/DIV
Rise Time	7nS (23.3nS at 1mV ~ 2mV/DIV)
Signal Delay	Leading edge can be monitored
Input Impedance	Approx. 1MΩ
Input Coupling	AC, DC, GND
Vertical Mode	CH1, CH2, DUAL, CH2 INV, ADD. (Dual automatic switching ALT and CHOP)

HORIZONTAL SYSTEM
A (main) Sweep Time	0.1µS ~ 0.5S / DIV ±3%,
	100nS ~ 50mS / DIV ±5% (x 10MAG),
	10nS ~ 50nS/DIV ±8% (x 10MAG)
B (delay) Sweep Time	0.1µS ~ 0.5mS / DIV ±3%,
	100nS ~ 50µS / DIV ±5%(x 10MAG),
	10nS ~ 50nS / DIV ±8% (x 10MAG)
Delay Time	1µS ~ 5mS, ±5%
Delay Time Jitter	Better than 1:10000

TRIGGER
Trigger Mode	AUTO, NORM, SINGLE
Trigger Source	CH1, CH2, ALT, LINE, EXT
Trigger Coupling	AC, DC, HR, REJ, TV
Trigger Slope	"+" or "-"

X-Y OPERATION
Sensitivity	5mV ~ 5V / DIV ± 4%
X-axis Bandwidth	DC ~ 2MHz
Phase Error	3º or less from DC ~ 100kHz

OUTPUT SIGNAL
Trigger Signal Output	Voltage : approx. 50mV / DIV into 50Ω
Calibrator Output	1kHz Square wave, 2Vpp ±2%

POWER SOURCE
AC 100V / 120V / 220V / 230V ±10%, 50 / 60Hz

ACCESSORIES
Power cord x 1; Instruction manual x 1; Probes(10:1/1:1)x2

DIMENSIONS & WEIGHT
310(W) x 150(H) x 455(D) mm； Approx. 8.2kg