DC Power Supply GPR-0875HD

0.01% High Regulation

Constant Voltage and Constant Current Operation

Low Ripple and Noise

Overload and Reverse Polarity Protection

3 1/2 Digits 0.5" LED Display

Application for Material and Products Aging

Built-in Over voltage and Over current Tripped Crowbar

Ten-turn Potentiometer

SPECIFICATIONS
CONSTANT VOLTAGE OPERATION
Regulation	Line regulation < 0.01% + 3mV
	Load regulation < 0.01% + 5mV ( < 10A)
	< 0.02% + 5mV (rating > 10A)
Ripple & Noise	< 2mVrms 5Hz ~ 1MHz
Recovery Time	< 100µS (50% Load change, Minimum load 0.5A)
Output Range	0 to rating voltage continuously adjustable

CONSTANT CURRENT OPERATION
Regulation	Line regulation < 0.2% + 3mA
	Load regulation < 0.2% + 3mA
Ripple Current	< 5mArms(<20A), < 20mArms(<50A)
	< 100mArms(<100A)
Output Range	0 to rating amperes continuously adjustable

METER
Digital	3 1/2 digits 0.5" LED display
	Accuracy ± (0.5% of rdg + 2 digits)

INSULATION
Chassis and Terminal	100MΩ or above ( DC 1000V )
Chassis and AC Cord	100MΩ or above ( DC 1000V )

POWER SOURCE
AC 120V±10%, 50/60Hz (AC 220V, or 240V order made)

ACCESSORIES
Instruction manual x 1, Test lead GTL-105 x 1(<3A) or GTL-104 x 1(<10A) or Not Available >10A or 600V For: GPQ, GPR, GPS, GPC, PPE, PPS, PPT, PSS (Current 4A-10A) 　 For: GPQ, GPR, GPS, GPC, PPE, PPS, PPT, PSS, PST (Current 3A)

DIMENSIONS
430(W) x 178(H) x 572(D) mm

SELECTION GUIDE
Digital	Model	Output Volts (V)	Output Amps (A)
	GPR-0875HD	0 ~ 8	0 ~ 75
	GPR-1850HD	0 ~ 18	0 ~ 50
	GPR-3520HD	0 ~ 35	0 ~ 20
	GPR-6015HD	0 ~ 60	0 ~ 15
	GPR-7510HD	0 ~ 75	0 ~ 10
	GPR-16H50D	0 ~ 160	0 ~ 5
	GPR-25H30D	0 ~ 250	0 ~ 3
	GPR-35H20D	0 ~ 350	0 ~ 2
	GPR-50H15D	0 ~ 500	0 ~ 1.5
	GPR-60H15D	0 ~ 600	0 ~ 1.5
	GPR-100H05D	0 ~ 1000	0 ~ 0.5
	NOTE: Welcome special order from 8 volts to 1000 volts and 0.5Amps to 75Amps under 1kVA available.