Graphtec GL900-8 GL900-4 記錄儀記錄器多頻道溫度測量記錄儀

Graphtec GL900 系列

GL900-8 , GL900-4

高速、長時間收錄的記錄器, 對應製品的信賴性測試

高速取樣調查和長時間數據收錄
高速、長時間收錄

容易使用及擁有高速獨立8頻道/模組多功能記錄器

電壓 : +/-20 mV to +/-500 V

溫度 : Thermocouples: K, J, E, T, R, S, B, N, W

濕度 : 0 to 100% (the B-530 option is required)

脈沖 : 4 channels Count, Inst., Rpm

邏輯 : 4 channels ‡ Select either Pulse or Logic

資料可儲存於內部記憶體或USB隨身碟

模擬 10個頻道/模組測量

Capture destination	10μs	100μs	500μs	1ms	10ms	100ms	1s
Internal RAM (up to one million points)	10 seconds	Approx. 1 min. and 40 sec.	Approx. 8 min. and 20 sec.	Approx. 16 min. and 40 sec.	Approx. 2 hrs. and 40 sec.	Approx. 1 day and 3 hrs.	Approx. 11 days and 13 hrs.
Internal flash memory (256 MB)	*	*	*	Approx. 1 hour.	Approx. 11 hrs.	Approx. 4 days	Approx. 46 days
External USB memory stick (512 MB)	*	*	*	Approx. 22 hrs.	Approx. 22 hrs.	Approx. 9 days	Approx. 93 days

The USB memory stick must be a standard model (without fingerprint recognition or other proprietary features).

Can be used as an X-Y recorder

The GL900 reproduces analog X-Y recorder movements and provides the illusion of pen up/pen down movements. It can be operated like an analog X-Y recorder and can also be used as a 4-pen X-Y recorder. The digital data format facilitates post-measurement confirmation of data values and report creation.

High-precision temperature measurement even during high-speed sampling

Lets users perform high-precision temperature measurements even during high-speed sampling – ideal for performing combined voltage and temperature measurements.

Comprehensive built-in trigger and timer functions

Using a combination of trigger and timer functions eliminates superfluous data and enables capture of only the required data.

設定實例一

To perform measurement over a four-day period starting January 10

Timer setting	Date and time	Start setting	January 10 00 hours 00 minutes
Timer setting	Date and time	Stop setting	January 14 23 hours 59 minutes
Trigger setting		Start trigger	Off
Trigger setting		Stop trigger	Off

設定實例二

To perform measurements of abnormal signals during device operations

Timer setting	Daily cycle	Start setting	09 hours 00 minutes
Timer setting	Daily cycle	Stop setting	17 hours 00 minutes
Trigger setting		Start trigger	Level CH 1 (3 V Rising)
		Stop trigger	Level CH 1 (2 V Falling)
		Repeat	On

設定實例三/EM>

To perform measurements every 20 minutes

Timer setting Hourly cycle Start setting 00 minutes 00 seconds

Stop setting 20 minutes 00 seconds

Trigger setting Start trigger Off

Stop trigger Off

設定實例四

To perform measurements for a period of one hour, every four hours, daily

With the timer set to daily cycle status, data is captured repeatedly for one hour every four hours.

Trigger setting	Start trigger	Off
	Stop trigger	Scheduled time (one hour)
	Repeat	On (Repeat interval: 4 hours)

Timer settings	Timer mode	Off, Date and time, Daily cycle, Hourly cycle
Trigger settings	Start source setting	Off, Level value, External input
	Stop source setting	Off, Level value, External input, Scheduled time
	Pre-trigger	0-100%
	Repeat capture	On, Off and Repeat interval

可處理大量高電壓測量

範圍 500 V 能夠 100 to 240 VAC 電壓作波形量度

特大 5.7寸彩色LCD顯示方便閱讀波形圖

Free Running display for waveform-checking without the need for data capture

The Free Running display lets users check input signal waveforms even before measurements begin. Since waveforms are displayed on each setup screen, users can make settings while viewing the waveforms.

Easy PC measurement via USB; remote monitoring via Ethernet web server and FTP functions

The USB and Ethernet connections enable transfer of captured data to your PC and setup and control of the GL900 from a PC, even without the PC software provided standard with the GL900.

Web server/FTP server functions

Waveform display and GL900 setup operations can be performed via a web browser (e.g., Internet Explorer). In addition, data files captured to the GL900’s internal memory or to a USB memory stick can be transferred or deleted from the PC.

USB drive mode

When your GL900 is connected to your PC via the USB interface, the GL900 can be operated in USB mode to enable fast, easy data transfers from internal memory to the PC.

NTP client function

Simply connect the GL900 to an NTP server via an Ethernet connection to synchronize GL900 time with NTP server time at periodic intervals

軟件能夠實時記錄資料

簡易操作適合任何人

軟件上之圖示按件方便及容易掌握使用

最方便快捷功能

直接連接Excel功能
能直接將量度中的資料寫入Excel檔案中.
搜尋功能
能在記錄的量度資料中作資料搜尋.
CSV batch conversion function
This function enables batch conversion of multiple captured files to CSV file format.
Thumbnail function
This function enables display of captured data files as thumbnails.

詳細規格 :
Number of input channels	8ch
Type of input terminal	BNC and M3 Screw type terminal
Method	All channels isolated, Simultaneous sampling
Measurement range　Voltage	20mV to 500V / F.S. (Between + and – terminals, 500 V p-p max.)
Measurement range Temperature	Thermocouple: K, J, E, T, R, S, B, N, W(WRe5-26)
Measurement range Humidity	0 to 100% ( When using optional B-530 humidity sensor is used )
External Input	Trigger: 1ch, Selectable between pulse and Logic: 4ch
External output	Alarm: 4ch
A / D converter	16bit(out of which 14 are internally acknowledged)
Maximum sampling interval	10 micro-second
Internal memory size	RAM：1 million data, 256MB Flash memory
External memory	USB memory (1 file 2 GB)
Calculation function	Statistics calculation, Searching function
Display	5.7 inch TFT color LCD
Interface to PC	Ethernet ( 10BASE-T / 100BASE-TX ) , USB (Compatible with full speed)
Operating environment Temperature :	0 to 40 ℃ (15 to 40 ℃ when operating by battery ) , Humidity : 5～85 % R.H.
Power supply Battery pack :	2 batteries installable
AC adapter	( 100 to 240V AC ,50 to 60Hz ) , DC input ( 8.5 to 24V DC)
External dimensions (approx.)	232W x 150H x 80D mm
Weight (approx.)	1.1kg ( Excluding the AC adapter and battery )
Vibration resistance	Compatible with JIS Vibration testing methods for automobile Type 1 Class A-equivalent