MR2300 The formal EMI test using a radio anechoic chamber is usually accompanied with long waiting time and many costs. If that test is repeated again and again every time the problems are solved, still more time and money will be lost. The MR2300 is used to solve EMI problems in advance ˇ§Precomplianceˇ¨, so that the number of times of the formal EMI test will be reduced to fewer (one or two times).
EMI test System
Equipping with a small size & wide bandwidth antenna developped with a university.
ˇ»Realizing compact whole test system with our original shieding box
(outside dimensions :approx.120(W)ˇŃ90(H)ˇŃ90(D)cm).
ˇ»Capable of both measurements of radiated emission (30 to 3000MHz)and conducted
emission(150kHz to 30MHz).
ˇ»PC software to automatically set parameters which are necessary for the EMI test.
ˇ»According to the following standards;
CISPR(11,22)ˇBEN550(11,22)ˇBFCC part15ˇBVCCI
ˇ° The original parameters by a customer can be set, too.
ˇ»Terribly low-priced whole test system.
The formal EMI test using a radio anechoic chamber is usually accompanied with long
waiting time and many costs. If that test is repeated again and again every time the
problems are solved, still more time and money will be lost.
The MR2300 is used to solve EMI problems in advance ˇ§Precomplianceˇ¨, so that the
number of times of the formal EMI test will be reduced to fewer (one or two times).