3600A Automatic   RS-232C, Centronics

Test items Features
Hold-On Adjust .

All in one, Stand Alone SMPS tester, 3600A series includes 800VA AC source, 

Four DC Load with Flexi able Polarity configuration, One OVP, Two Timing and
Four PARD Measurement.
Load Regulation .
Line Regulation . Manual or Computer Edit Mode .
Combine Regulation . Manual, Auto, or Step Testing Mode .
Efficiency . Centronics for all data direct print output or store on file.
Power Good / Fail . RS-232C for Download/UpLoad Testing Procedure .
Set-up / Hold-up time . Electronic Calibration .
P-P Noise (PARD) . Ready to use Testing Fixture .
OVP Testing .

Re-installable Option for PARD, Line Regulation, AC Meter, or change to DC  Meter.   
OCP Testing . ¡@
Short Testing .     ¡@
Applications
Up to four output Power supply with any configuration of 2+/2-, 3+/1-, or 4+
Single, Qual, Tripple, or Quad Total output power up to 630W power supply .
AC / DC Power Supply .
DC / DC Converter .
Production Line .
Quality Control .
Incoming Inspection .
Engineering Evaluation .


 
¡@

Descriptions

The 3600A series was designed for testing AC / DC and DC / DC power supply up to 630W, it will accommodate power supplies with as many as four outputs. It will store test programs for eight different power supply specifications. Each of these tests may include up to 32 steps of sub testing. Testing procedures can be generated and edited manually via front panel or remotely using Application
Software 9800A; Testing may be performed in the Automatic or Manual mode. The manual mode accommodates individual selection of up to 32 test steps. The Automatic mode will provide Pass/Fail and Go/NG testing Stored programs and test data may be print out via Centronics interface. This information may also be uploaded to or downloaded from a PC via the RS-232C port.

The 3600A series is ideal for statistical Analysis where UUT selective data is needed as data is visible on the front display.Optional , 5030 OVP DC voltage source provides OVP testing in Load channel 1 and 2. 9500 and 9501 offer a stable AC Voltage source, yielding extremely accurate Line regulation. The 9900 
Twin Testing Fixture is designed to yield higher throughput making it ideal for production and incoming inspection applications. Other test fixtures include the 9910 and 9920 which are general purpose test fixtures. Remote control of function keys 1 to 8 is made by 9930. Option 3600A001 through 3600A004 offers a different configuration to meet the testing requirement and budjet of varies field; You can choose with or without PARD, Line-regulation, AC Meter, DC Meter, where 3600A004 to 3602A001 is suitable for DC / DC Testing; Of course, you can re-install these option after purchase 3600A.

¡@


Electronic load
Load Channel 1 2 3 4
Input Rating
Power 300 W 250 W

40 W
Current 0 - 60 A 0 - 40 A 0 - 8A 0 - 4A
Voltage +35V +50V ¡Ó50V ¡Ó50V
Constant Current (CC) Mode 0 - 60 A 0 - 40 A 0 - 8 A 0 - 4 A
Accuracy

¡Ó 0.5% of ( Reading + Range )
Constant Resistance (CR) Mode 0.083-333£[ 0.125-500£[ 0.625-2500£[ 1.25-5000£[
Accuracy ¡Ó 0.8% of  ( Reading + Range )
Voltage Meter (DVM) 0.00 - 35.00V 0.00 - 50.00V
Accuracy ¡Ó 0.1% of ( Reading + Range )
Current Meter (DAM) 0.00 - 60.00 A 0.00 - 40.00 A 0.000 - 8.000 A 0.000 - 4.000 A
Accuracy ¡Ó 0.5% of ( Reading + Range )
PARD @ B.W. 0.2, 2, 20 Mz Range: 0.000 - 0.750 mV p-p  ( -375mV to +375mV )
Accuracy ¡Ó ( 2% of Reading + 10mV )
OVP Voltage 0.00 - 50.00V

N / A
Accuracy 0.2% of (Reading + Range )
OTHERS: 
Short Testing 0.04£[ 0.4£[
Protection OVP, OCP, OPP, OTP, 
Analog Programming CH1, HC2 : 0 to +10V, CH3, CH4 : 0 to ¡Ó10V

¡@

¡@

AC Source
Output Voltage 800VA, 50/60Hz
115V @7Arms 92, 115, 132V
230V @ 3.5Arms 90, 115, 132, 180, 230, 264V
AC Voltage Meter 0.0 - 300.0 Vrms
Accuracy ¡Ó 0.3% of  (Reading + Range )
AC Current Meter 0.00 - 8.00 Arms
Accuracy ¡Ó 0.5% of  (Reading + Range )
AC Power Meter 0.00 - 800.00 W
Accuracy ¡Ó ( 0.5% of Reading + 4W )

Timing Measurement ant Control
Power Good / Fail Time 0 - 9999 mS
Set-up / Hold-up Time 0 - 9999 mS
Accuracy ¡Ó5 uS
Threshold Voltage Vth VPGS
Input Range 0 - 50V 0 - 5.6V
Setting Range 0.05-50.00V 0.01-5.60V
Auto / Step Testing Time Each Step from Step1 to 32
Tmeas.1 - Tmeas.32 500.0 ms - 20 Sec
Tdelay.1 - Tdelay.32 0.0 ms - 20 Sec

¡@

¡@

General Accessories
AC Power: 115/230Vac, ¡Ó10%, 50/60Hz . Power Cord .
AC Source Input: 115/230Vac . 9910 Universal Fixture .
Weight : 22Kg . 9920 PC Fixture(PS/2)
Dimension: 483(W) x 177(H) x 445(D) . 9800A Application Software .
Digital Output Port: 8 Bit. Operation Manual .
Options
3600A001 Delete PARD .
3600A002 Delete Line Reg.
3600A003 Delete Line Reg., AC Meter .
3600A004 Delete PARD, Line Reg., AC Meter .
3602A 3600A'S AC source is changed to DC source as a DC & DC test system.
3602A001 Delete PARD from 3602A.
5030 5A/30V OVP Source .
9500 1KVA 115V 50/60Hz input 115V/230V 50/60Hz output AC source .
9501 1KVA 230V 50/60Hz input 115V/230V 50/60Hz output AC source .
9900 Twin Testing Fixture .
9910 Universal Testing Fixture .
9920 PC Power Supply(PS/2) Fixture .
9921 ATX fixture with (+5,+12,+3.3,+5VSB ).
9922 ATX fixture with (+5,+12,+3.3,-12V ).
9930 Remote Controller.

Products list | brand | Model No. | Home