| Specification for TOPWARD 7045A and 7046A Analog Oscilloscopes | |
| VERTICAL AXIS | |
| Bandwidth (-3dB) | DC-40MHz, X5MAG:15MHz |
| Sensitivity | 5mV/DIV-5V/DIV¡Ó3%. 10 Calibrated Steps, X5MAG:1mV/DIV-1V/DIV |
| Display Mode | CH1, CH2, DUAL (ALT/CHOP), ADD |
| Rise Time | 8.8ns |
| Input Impedance | 1 Mohm//25PF |
| Input Coupling | AC, DC, GND |
| Max. Input Volt | 400V DC + Peak AC |
| ¡@ | ¡@ |
| HORIZONTAL AXIS | |
| Main Time Base | 0.1µS/DIV-2S/DIV, 23 Calibrated Steps, X 10MAG: 10nS/DIV-200mS/DIV |
| Delay Time Base | 7045A(N/A), 7046A(YES) |
| Delay Display | Main, Mix, Delay |
| ¡@ | ¡@ |
| TRIGGER | |
| Mode | AUTO, NORM, TV-V, TV-H |
| Source | CH1, CH2, ALT, LINE, EXT |
| Sensitivity | INT: 0.5DIV, EXT:0.5V |
| Polarity | +, - |
| Level | Adjustable |
| Hold Off | YES |
| ¡@ | ¡@ |
| X-Y | |
| Mode | CH1:X, CH2:Y |
| Sensitivity | 5mV/DIV-5V/DIV |
| Bandwidth (-3dB) | DC-1MHz |
| Phase Difference | 3¢X at 50KHz |
| Z AXIS\Z Modulation | YES |
| ¡@ | ¡@ |
| CRT | |
| Cursor Readout | N/A |
| Screen | 6-inch Rectangular, Internal Graticule with % Scale |
| Effective Area | 8 X 10cm |
| Acceleration Voltage | 2.1KV |
| Illumination | 7045A(N/A), 7046A(YES) |
| ¡@ | ¡@ |
| GENERAL | |
| CH2 Output | YES |
| Component Test | 7045A(N/A), 7046A(YES) |
| Beam Find | 7045A(N/A), 7046A(YES) |
| Calibrator | Square wave, 1KHz¡Ó10%, 2Vp-p¡Ó3% |
| Trace Rotation | Electrical, front panel adjustable |
| Dimension & Net/Gross Weight | 324(W) x 132(H) x 398(H) mm & 7.8kg/12kg |
| Power | 115V/230V¡Ó10%, 50/60Hz |
|
|
|