Contact

Waveforms	Sine, square, triangle, ramp, pulse
Amplitude	20Vp-p, Open [Output protected up to 30V (DC+AC)]
Attenuator	0dB, 30dB
Output Impedance	50Ohms 10% for main and sync
DC Offset	+10V ~ -10V
Duty Control	20:80 (frequency unchanged) continuously variable with 50:50 calibrated switch
V.C.F.	0 to +5V control frequency to 1000:1
Frequency Range	0.1Hz to 2MHz in 7 ranges
Frequency Accuracy	Counter accuracy
Distortion	< 1%, 10Hz ~ 100KHz
Rise/Fall Time	< 100nS
Rise Time for Sync Output	< 25nS
Sync Output Level	> 3Vp-p (Open), 20 TTL Load
Sweep Type	Linear, Log
Sweep Width	> 100:1, continuously variable
Sweep Rate	From 10mS to 5S, continuously variable
Frequency Counter Display	6 digits 0.4" green LED display with Hz, KHz, GATE, OVFL LED
Frequency Counter Mode	Func./Count
Frequency Counter Attenuator	0db, 30dB
Frequency Counter Accuracy	?(Time base accuracy+1 count)
Frequency Counter Time Base	10MHz?10ppm (28?C?5?C)
Frequency Counter Resolution	0.1Hz, 1Hz, 10Hz, 100Hz, 1KHz
Frequency Counter Gate Time	10S, 1S, 0.1S, 0.01S
Frequency Counter Range	10Hz to 100MHz
Frequency Counter Sensitivity	?/font> 50mVrms (10Hz to 100MHz)
Frequency Counter Maximum Input	150Vrms
Frequency Counter Input Impedance	1MW//100pF
Power Requirement	115/230 Vac; 50/60Hz single phase
Accessories Supplied	Power cord, hook-up leads, intruction manual
Dimension	10.2"(W) x 3.3"(H) x 10.1"(D)
Weight	4.4 Pounds