Programming & Testing system
The processing time of a rushes memory is shortened sharply.
Writing / inspection time 60 seconds of 64M flash memory
Outstanding operativity by the menu system which used the touch panel
Correspond to various packages promptly. (TSOP, CSP, BGA) |
¡@
Y1000 reduces Programming and Verification time of Flash Memory drastically and realizes processing
time closed to actual specification of the devices.
¡@
Easy and comfortable operation with touch panel!
MMX Pentium 166MHz, 32MB main memory, 8.4GB HDD and 6.5 TFT LCD display with TOUCH PANEL for basic hardware.
¡@
Increase productivity!
Pack a punch in prototyping and R&D!
In combination with Auto-Handler, productivity can be more improved. Since Y1000 can be networked for high-speed data
transfer, it is also suitable for development field (Binary data transfer time for 1M byte is 8 seconds and data transfer 32M
bit Flash memory is 32 seconds.) Y1000 provides improvement of throughput widely from development to production field.
¡@
Break away from current limitation, Y1000 brings you "Testing"!
According to purpose of measurement, a simple measurement of Access Time, ICC and IPP measurement are possible
so that quality of device can improved. Further, failure-analyzing function such as various margin tests, analyzing function
of fail bit is available.
¡@
Supports various device packages
Not only PLCC, TSOP, SOP but also variety of package such as FBGA, uBGA, MCP, QFP are supported.
Please refer to device support list and package list.
| SPECIFICATION (Y1000-8) |
| Size: 400(W) x 300(D) x 215(H) mm |
| Weight:8.8Kg / 9.2Kg(Include LAN I/F) |
| Power: 85-265v 50/60Hz 200VA |
| Operating temperature: 10-35 degree centigrade |
| Humidity: 20-80% non-condensing |
| Supported devices: EPROM, OTPROM, EEPROM Flash Memory, Micro controller |
| Programming: manufacturer approved algorithm |
| ¡@ |
| CONTROL SYSTEM |
| CPU: MMX Pentium 166MHz |
| Main Memory: 32MB |
| HDD: 8.4GB |
| FDD: 3.5inch (2mode) |
| LCD: 6.5inch TFT (with touch panel) |
| OS: Windows95 |
| Option: LAN interface (10BASE-5/T) |
| ¡@ |
| PROGRAMMING SYSTEM |
| CPU: SH7032 |
| RAM: 128Mbit |
| Pin Driver: 64pin per socket |
| Address: 27 (A0 to A23) |
| Data: 8, 16, 32bit |
| Vcc: 2.0...7.0v (40mV step) |
| Vpp: 2.0...16.0v (80mV step) |
| Control signal: 7 pins (Max.) |
| Pulse width: 100nS (Min.) |
| ID check command or A9/VIH |