Xitron XT9812 LED Electronic Load
 
 

Contact

XT9812 LED Electronic Load

XT9812 Series LED Electronic Load for LED Power Driver Test

XT9812 DC Electronic Load is a new generation product from XiTRON. The XT9812 is designed for LED driver or DC Power Supply applications. There is a special circuit that has been designed primarily for the LED driver. The design utilizes high-performance semiconductors that are high speed and high accuracy, with resolutions of 0.1 mV and 0.01 mA (the basic accuracy is 0.03%, the basic current rise speed is 2.5 A/us). The XT9812 has wide applications from production line settings to the engineering bench. Target markets include the following type of manufacturers and markets; LED driver, cell phone charger, cell phone battery, electronic vehicle battery, switching power supply and linear power supply manufacturers, research institutes, automotive electronics, aeronautics and astronautics, solar cells and fuel cell markets.


 

PPA1530 Power Analyzer Real Time

Features:

- Six high speed operating modes: 1. Constant Current (CC); 2. Constant Resistance (CR); 3. Constant Voltage (CV); 4. Constant Wattage (CW); 5. Constant Current (CC) + Constant Voltage (CV); and 6. Constant Resistance (CR)+ Constant Wattage (CW)
- LED mode supports LED power driver test, provides steady reading, and capacitance sensitive driver compatible
- Over current, over voltage, over power, over heating and reversed polarity protection
- High-luminance VFD screen
- Intelligent fan system that is automatically activated based on temperature changes
- Soft-start time setting runs the power supply according to the pre-set voltage value
- Battery and short-circuit testing functions
- Capable of dynamic testing with rising edge and falling edge settings
- Supports external trigger of input and output
- External current waveform monitor terminal
- Supports remote voltage compensation and multi data storage
- Power-on-self-test, software calibration ready, and standard rack mountable
- Arbitrary waveform editing
- USB interface

 

 

   

 


 


MODELModel

XT9812 / XT9812B

INPUT RATING

Power

300Wxyz

Current

0-30A or 0-15A(B)

Voltage

0-150V or 0-500V(B) z

CC MODE

Range

0-3A

0-30A or 0-15A(B)

Resolution

0.1mA

1mA

Accuracy

0.03% + 0.05%FS

0.03% + 0.05%FS

CV MODE

Range

0.1 - 19.999V

0.1-150V

Resolution

1mV

10mV

Accuracy

0.03%+0.02%FS

0.03%+0.02%FS or 0.05%(B)

CR MODE

(Input Current ≥ 10%FS)

(Input Voltage ≥ 10%FS)

Range

0.03Ω-10kΩ

0.03Ω-5kΩ

Resolution

16 digit

16 digit

Accuracy

0.1%+0.1%FS

0.1%+0.1%FS

CW MODE

(Input Current ≥ 10%FS)

(Input Voltage ≥ 10%FS)

Range

0-300W

0-300W

Resolution

1mW

10mW

Accuracy

0.1%+0.1%FS

0.1%+0.1%FS

V MEASUREMENT

Voltage

0-19.999V

0-150V or 0-500V(B)

Resolution

1mV

10mV

Accuracy

0.015%+0.03%FS

0.015%+0.03%FS

I MEASUREMENT

Current

0-3A

0-30A or 0-15A(B)

Resolution

0.01mA

0.1mA

Accuracy

0.03%+0.05%FS

0.03%+0.08%FS

W MEASUREMENT

(Input Current ≥ 10%FS)

(Input Voltage ≥ 10%FS)

Power

100W

300W

Resolution

1mW

10mW

Accuracy

0.1%+0.1%FS

0.1%+0.1%FS

BATTERY MEASUREMENT

Battery Input: 0.1-150V;Max. Measurement: Capacity=999AH

Resolution=0.1mA; Time Range=1S-16H

DYNAMIC MEASUREMENT

Transition List: 0-25kHZ; 2.5A/μS; T1&T2:60μS-999S; Accuracy:+15% offset+10%FS

Current Soft- start-up time

1mS; 2mS; 5mS;10mS; 20mS; 50mS;100mS; 200mS; 500mS and 1000mS

Accuracy:+15% offset+10%FS

LED TEST

Press shift+ button to enter LED test. Repeat to escape the LED test. A D character shows on lower right of the display in the LED test.

SHORT CIRCUIT

Constant Current (CC)

3.3A

33A or 18A(B)

Constant Voltage (CV)

0V

Constant Resistance (CR)

28mΩ or 200mΩ(B)

TEMPERATURE

Operating

0~40ºC

Storage

–10ºC ~ 70ºC

WEIGHT

Lbs/Kgs

7.7 lbs/3.5kgs

OPERATING POWER SUPPLY

100V/200V, 60Hz/50Hz Manual Switch