CP-300系列 数字式功率表
Specification | |
Line measure 电源测量 | Single phase, two conductor (1φ2W) |
Values measured 测量值种类 | Voltage, current, Active power, power factor, reactive power, apparent power, frequency. |
Measurement ranges 测量范围
|
Voltage,
current and active power see separate table of ranges and resolution. |
Operating principle 操作方式 | Voltage and current: True RMS Power:Analog multiplier circuit. |
Range selection 范围选择 | Auto or manual (remote via RS-232) |
Sampling rate 取样频率 | 3.3 times/sec. |
Input impedance 输入阻抗
|
Voltage:
approx 1Mohm |
Maximum allowable input 最大允许输入 |
Voltage: 650V rms, Current:20A RMS 50A peak(CP-310,CP-320A) / 50A RMS 125A peak (CP-350) |
Maximum common mode voltage 最大一般模式电压 |
Voltage and current input terminals: 600V rms. |
Crest factor 波形因素 | 3 |
Input method 输入方法
|
Voltage:
resistance divider |
Input terminals 输入端子 | large binding posts. |
Effective input range 输入范围效率 | 5% to 100% of the set range. |
Temperature Coefficient: | Less than ± 0.05% f.s/ oC. |
Averaging function: | Displays computed average (fix 3 measured). |
Computing Function | |||
Apparent Power | Reactive power | Power factor | |
VA = V*A | VAR = √(VA2 -W2) | PF = W (VA) | |
Computing Range :VA , VAR : Voltage and current range | |||
PF : Zero to unity leading or lagging |
|||
Computing Accuracy: VA * VAR ± 0.05% of rated value | |||
PF :± 0.001 |
|||
Frequency measurement function | |||
Operating Principle 操作方式 | Reciprocal counting method | ||
Measurement range 测量范围 | 5% to 100% set range(10Hz ~ 100KHz) | ||
Auto Range 自动选择范围 | 45Hz / 10KHz / 100KHz | ||
Accuracy 准确度 | ±1 DGT of the range | ||
Measurement Cycle 测量周期 | 3.3 times / sec | ||
Display Range 表示范围 | 10.00Hz ~ 99999Hz(5 digits) | ||
Interface | |||
RS-232 | Baud Rate:1200 , 2400 , 9600 bps. | ||
Transmission system : Srart-stop synchronization 8 bits , 1 stop bit. none parity | |||
General specification | |||
Dielectric Strength 耐压 | 2.2KV AC (50/60Hz) for one minute between input terminals and case. | ||
Insulation Resistance 绝缘 | more than 20Mohm at 500V dc between input terminals and case between case and power line. | ||
Operating Temperature 操作温度 | 5 to 50 oC (41 to 104℉) | ||
Humidity Range 操作湿度 | 10 to 90% (relative humidity) non-condensing. | ||
Line Requirements 电源 | AC115V or 230V ± 15%, 47 to 63 Hz 15VA | ||
Dimensions/Weight 尺寸重量 | 260x110x360(WxHxD)/4.8Kgs net. | 装箱材积表 | |
|