CS-3100 Curve Tracer (I-V curve measurement such as IGBTs)
CS-3200 Curve Tracer (I-V curve measurement such as IGBTs)
CS-3300 Curve Tracer (I-V curve measurement such as IGBTs)

Contact

CS-3100 CS-3200 CS-3300 Curve Tracer (I-V curve measurement such as IGBTs)

CS-3100 CS-3200 CS-3300 suitable for various semiconductor I-V curve measurement such as IGBTs, MOS-FETs, Transistors, Diodes, etc
Collector supply CS-3100 CS-3200 CS-3300
Mode High voltage 1
AC, ± Rectified SIN, ± DC, ± LEAKAGE
High voltage 2
-
High voltage 2
-
± Pulse
Maximum peak power High voltage 1 120mW, 1.2W, 12W, 120W, 390W ( *390W can be selected exculuding the maximum peak voltage setting at 3,000 range.)
High voltage 2
-
High voltage 2
-
400W, 4kW
400W, 4kW, 10kW
High voltage mode1
Maximum peak current(maximum peak pulse current)
Maximum peak voltage
75mA (150mA)
3,000V(2,500V / AC)
750mA(1.5A)
300V
7.5A(15A)
30V
Loop compensation The floating capacitance between the collector terminal and the ground of the fixture is compensated by the hardware in the high voltage mode. Digital compensation is also available.
High voltage mode2
-
High current mode (pulse only)
-
Maximum peak current Maximum peak voltage
400A 40V
40A 40V
   
Maximum peak current Maximum peak voltage
1,000A 40V
400A 40V
40A 40V
Pulse width / measurement point
-
The pulse width is variable in the range from 50us to 400us. Measurement points can be specified (with a resolution of 10us/step)
Maximum data points
20 to 1,000 points can be specified per trace
Step generator  
Current mode Amplitude range: 50 nA to 200mA, 21 ranges, 1-2-5 step Maximum current: ±2A / Offset ± 10 times STEP AMPLITUDE setting
Voltage mode Amplitude range: 50 nA to 2V, 6 ranges, 1-2-5 step Maximum current: ±40V / Offset ± 10 times STEP AMPLITUDE setting
Step rate Staircase wave: 2times of 50 Hz or 60 Hz (50 Hz or 60 Hz in the AC mode) Staircase wave: 2times of 50 Hz or 60 Hz (50 Hz or 60 Hz in the AC mode) Pulse: The pulse changes in the range from 80ms to 1,000 ms. (The lowest frequency limited by the maximum peak power consumption setting)
Pulse step
The pulse width is variable in the range from 50us to 400us at 10us resolution
Number of steps 0 to 20 steps
AUX output  
Range
OFF, -40 to +40 V, variable with at 100mV resolution
Vertical axis  
Collecto current High voltage
1 uA/div to 2 A/div, 20 steps, 1-2-5 switching
High current
-
100 mA/div to 50 A/div, 9 ranges, at 1-2-5 step 100 mA/div to 100 A/div, 10 ranges, at 1-2-5 step
Emitter current(LEAKAGE)
1 uA/div - 2 A/div, 20 steps, 1-2-5 switching
Horizontal axis  
Collector voltage High voltage 50 mV/div to 500 V/div, 13 ranges, at 1-2-5 step
High current
-
50 mV/div to 5 V/div, 7 ranges, at 1-2-5 step
Base / emitter voltage
50 mV/div to 5 V/div, 7 ranges, at 1-2-5 step
Miscellaneous  
Display 8.4-inch colour TFT-LCD (SVGA 800 x 600 pixels)
Data save / recall Internal: memory ( step: 256, REF waveform: 4) External: Removable storage connected to the USB port (setup, waveform save / recall, screen hard copy)
USB 1 port (USB 1.1)
Remote control Remote control by LAN: 1 port (100BASE-TX)
Mechanism section  
Dimensions (mm) 424 (W) x 555.2 (L) x 221 (H) (Without the external projection portion) 424 (W) x 555.2 (L) x 354.5 (H) (Without the external projection portion)