Function generator SG-4105 / SG-4104TOP
|
|
DDS method adopted, high-quality waveform output |
|
Increased work efficiency by adopting independent "key" and "knob" |
|
|
GPIB, RS232 interface standard equipment (SG-4105) |
|
Packed with abundant and unique functions for expanding applications
■ |
High-quality waveform |
||
Five types of waveforms can be obtained: sine wave, triangle wave, square wave, ramp wave, pulse wave and direct current. The maximum output is 20Vp-p (output end open), and offset can be applied until the peak voltage reaches ±about 10V (output end open). |
|||
|
|
|
|
Sine wave output 15MHz 10Vp-p |
Square wave 100kHz 10Vp-p |
Triangular wave 100kHz 10Vp-p |
|
■ |
Smooth and multifunctional SWEEP (SG-4105 only) |
||
Since the frequency is controlled by the dedicated ASIC, high-speed and smooth SWEEP is realized. Not only log and linear SWEEP but also SWEEP SYNC signal and SWEEP MARKER signal can be output from the back, and the timing of a specific signal in SWEEP can be detected. Also, depending on the SWEEP TYPE setting, when the STOP frequency is reached, oscillation can be stopped or the STOP frequency can be continued. |
|||
|
|
||
TYPE: STOP SWEEP wave and SWEEP SYNC, SWEEP MARKER |
TYPE: CONTINE SWEEP wave, SWEEP SYNC, SWEEP MARKER |
||
■ |
Repeatable burst (SG-4105 only) |
||
You can set the ON count and OFF count up to 65536 shots. Burst waves can be output repeatedly without an external trigger. |
|||
|
|||
Pulse wave, burst wave train |
|||
Back panel and various interfaces
SG-4105 back |
SG-4104 back |
|
|
|