Specifications

Display section

Type

5.8-inch color LCD (800 x 480dots)
8div x 10div (60dots/div, Graticule selectable)
Storage CRT

Type 

2-inch dia., CCD scan converter tube (380,000pixels)

Persistence characteristics

Fastest. writing speed

10div/ns

Persistence time

Variable, infinite persistence
Vertical deflection system (Y axis)

Mode 2

CH1, CH2, CH3, CH4, ADD(CH1¡ÓCH2), ALT/CHOP(555kHz ¡Ó1%)

CH1, CH

Sensitivity

Range

50 Ohm: 5mV/div - 1V/div 8steps (1-2-5)
1 magaohm: 5mV - 5V/div 10steps (1-2-5)
Variable: adjustable less than 1/2.5

Accuracy

¡Ó 2%

Frequency bandwidth(-3dB) 

50 Ohm

DC - 1GHz(10mV - 1V/div,TS-81000)
DC-600MHz(10mV-1V/div,TS-80600)
DC - 500MHz(5mV - 9.9mV/div)

1 magaohm

DC - 500MHz(10mV - 5V/div) at the tip of SS-101R probe
DC - 350MHz(5mV - 9.9mV) at the tip of SS-101R probe
* Passive probe Model SS-101R is optional

Rise time
(Calculated from freq. Bandwidth x rise time=0.35)

350ps (50 Ohm 10mV - 1V/div,TS-81000)

583ps (50 Ohm 10mV - 1V/div,TS-80600)

Offset voltage

5mV - 50mV/div : ¡Ó 1V
100mV - 500mV/div : ¡Ó 10V
1V - 5V/div : ¡Ó 100V

Offset accuracy

(¡Ó1.5%+0.5% of full scale + 1mV)

Input RC

50 Ohm: 2%
1 magaohm: 1% // 16pF
(DC1M 5mV - 5V/div, AC1 megaohm 100mV - 5V/div)

Input coupling

DC 50 Ohm, DC1 megaohm, AC1megaohm, GND

Max. input voltage

50 Ohm 5Vrms
1 megaohm : 250Vmax(DC + Peak AC, 5kHz or less)

CH3, CH4

Sensitivity

Range

100mV/div, 500mV/div

Accuracy

¡Ó 2%

Frequency bandwidth

(-3dB) DC - 500MHz

Offset voltage

100mV/div : ¡Ó1V
500mV/div : ¡Ó5V

Input RC

1megaohm : ¡Ó1.0% // 16pF

Input coupling

DC,AC

Max. input voltage

1megaohm: ¡Ó250Vmax (DC + Peak AC, 5kHz or less)

ADD

Frequency bandwidth(-3dB) DC - 1GHz(10mV - 1V/div) at 50 Ohm input (TS-81000)
DC - 600MHz(10mV - 1V/div at 50 Ohm input (TS-80600)

AC

Lower cutoff for AC couple

10Hz(-3dB)

Bandwidth limiter

20MHz,200MHz

Probe sense

10:1, 100:1 detection

Signal delay time

20ns or more

Trace separation

more than 4div
Triggering

A triggering

Frequency

DC - 1GHz (TS-81000) / DC - 600MHz (TS-80600)

Signal sources

CH1, CH2, CH3, CH4, LINE

Coupling

DC: DC - fmax
AC: 100Hz - fmax
HF-REJ: attenuated at 10kHz or more
LF-REJ: attenuated at 10kHz or less

Slope

+, -

Sensitivity

DC - 10MHz
0.4div
- 100MHz
1.0div
- fmax
2.0div
50 Ohm 5mV/div - 9.9mV/div fmax: 500MHz
50 Ohm 10mV/div - 1V/div fmax: 1GHz (TS-81000)
50 Ohm 10mV/div - 1V/div fmax: 600MHz (TS-80600)

B triggering

Frequency

DC - 500MHz

Signal sources

CH1, CH2, CH3, CH4

Coupling

DC: DC - 500MHz
AC: 100Hz - 500MHz
HF-REJ: attenuated at 10kHz or more
LF-REJ: attenuated at 10kHz or less

Slope

+, -

Sensitivity

DC - 10MHz 0.4div
- 100MHz 1.0div
- 500MHz 2.0div

TV triggering

NTSC, PAL, CUSTOM
Line select (1 to 3000), Field select (1,2,4,8)
CUSTOM (include HDTV)

Sensitivity

1.5 - 8.0div
TV clamp available

Event trigger

Count mode

range:1 - 65535
Max count frequency: 50MHz

Burst mode

range: 0.15microsecond- 9.99second
Horizontal deflection system (Y axis)

Horizontal display

A, ALT, B, X-Y

A sweep

Sweep mode

AUTO, NORMAL, SINGLE

Max. sweep rate

200ps/div (TS-81000), 500ps/div (TS-80600)

Range

2ns - 200ms/div 25steps,1-2-5, (TS-81000)
5ns - 200ms/div 24steps,1-2-5, (TS-80600)

Variable

2ns - 600ms/div (TS-81000)
5ns - 600ms/div (TS-80600)

Accuracy I (*1)

¡Ó2% (5ns - 200ms/div) over center 8div
¡Ó3% (2ns/div) over center 8div (TS-81000)
Accuracy II (*1) ¡Ó5% (5ns - 200ms/div) any 2div within center 8div
¡Ó6% (2ns/div) over center 8div (TS-81000)
(*1) 20ns or 1div for the beginning of the sweep and 20ns for the end of sweep should be excluded.
Add 1% when VARIABLE is ON

B sweep

Delay method

Triggered delay (TRIG'D DELAY)
Continuous delay (RUNS AFTER DELAY)

Max. sweep rate

200ps/div (TS-81000), 500ps/div(TS-80600)

Range

2ns - 20ms/div 22steps,1-2-5 (TS-81000)
5ns - 20ms/div 21steps,1-2-5 (TS-80600)

Accuracy I (*2)

¡Ó2% (5ns - 20ms/div) over center 8div
¡Ó3% (2ns/div) over center 8div (TS-81000)

Accuracy II (*2)

¡Ó5% (5ns - 20ms/div) any 2div within center 8div
¡Ó6% (2ns/div) over center 8div (TS-81000)
(*2) 20ns or 1div for the beginning of the sweep and 20ns for the end of sweep should be excluded

Dual delay

Available

Sweep magnification

x 10

Delay jitter

less than 1/50000

Hold off time

variable 1sec. max.
X-Y

X axis

CH1

Sensitivity

Same as CH1

Frequency bandwidth

10MHz(-3dB)

X axis

CH1, CH2, CH3, CH4

Sensitivity

Same as each CH

Frequency bandwidth

Same as each CH

X-Y phase difference

Within 3¢X(DC - 5MHz)
CAL signal

Waveform

Square-wave

Frequency

1kHz ¡Ó0.1%

Output voltage

0.6V ¡Ó1%
CH2 OUT

Amplitude

20mV/div ¡Ó20% (50 Ohm)

Frequency bandwidth

500MHz(-3dB) 50 Ohm, 10mV/div - (TS-81000)
300MHz(-3dB) 50 Ohm, 10mV/div - (TS-80600)

Output resistance

50 Ohm ¡Ó10%
Z AXIS IN

Intensity modulation voltage

0.5Vp-p

Polarity

Dark with positive voltage and brighter with negative voltage

Frequency range

DC - 5MHz

Input resistance

5k Ohm ¡Ó 20%

Max. input voltage

¡Ó40V max.
Probe power supply

Connectors

2

Suitable probes

SFP-4A, SFP-5A, SS-240
Auto Setup

Auto Setup

Input sensitivity, Offset, TIME/DIV, Trigger level
Amplitude: 30mV - 35V
Frequency: 50Hz-200MHz
Cursor measurement

Delta t

Relative time difference measurement with cursor
Resolution 1/60div

Delta V

Relative voltage difference measurement with cursor
Resolution 1/60div
Frequency counter

Frequency bandwidth

2Hz - 1GHz (TS-81000)
2Hz - 600MHz (TS-80600)

Digit

6digits, accuracy ¡Ó0.01%
Clock

Display

Month/Date/Time/Minute

Accuracy

¡Ó50ppm
Interface

Remote control

10Base-T(E-thernet)

PC card slot

ATA card available (PCMCIA Type II)

External Monitor out

VGA WIDE

NTSC output

Amplitude: 1Vp-p ¡Ó0.3V 75 Ohm

(Composite, S out)

Output resistance: approx. 75 Ohm (AC coupling)

Built-in printer

Line Thermal Printer
Printing speed: 10mm/sec
Paper size : width 112mm, length 25m
Power supply

Voltage range

100V - 240V AC 50/60Hz

Power consumption

200VA max (with printer operation)

Power consumption In the Standby mode

approx. 5VA max.
Weight and dimensions

Dimensions

approx. 198H x 332W x 406Lmm (accessories and projections are not included)

Weight

approx. 10Kg (accessories and options are not included)
Environmental conditions

Performance guaranteed temperature

+10oC - +35oC

Operating range Temperature

0 - +40oC
+5 - +40oC (Built-in printer operation temperature)

Humidity

90% /+40oC

Storage range Temperature

-20oC - +60oC/80% RH

Operating

2,000m, air pressure of approx. 79kPa

Non operating

15,000m, air pressure of approx. 12kPa

Preheating time

These specifications are guaranteed after power has been on for 30 minutes or longer.
Accessories

Instruction manual (1), Power cord (1), Printer thermal paper (1)

¡@

Top page   Features   Specifications   Technology   Applications    I/O    Accessories

Products list | brand | Model No. | Home