Contact

As-513 Low-loss Simulated Electronic Load

The As-513 can be used as an electronic load device for load testing AC power supplies and power equipment (instead of resistors, inductors, capacitors, or dummy network).

	Two operation modes: resistance mode and constant current mode
	Current waveforms can be freely set to simulate non-linear load in harmonic current, etc.
	Current phase setting is enabled.
	Operates using AC or DC power
	Reduces energy consumption via power recovery
	Three-phase testing enabled in master and slave operation
	Can be connected to boosters (up to four 2kVA-boosters)
	Support automated testing via an external interface

Maximum input voltage:	AC: 150Vrms / 300Vrms DC: ±212V / ±424V
Max. input voltage:	AC: 20Arms / 10Arms (40Hz to 100Hz) DC: ±9.0A / ±4.5A
Power	2kVA