Low Noise DC Power Supply

LP5393/LP5394


Our Experience and Know-How Made Sure the Amplifier Was Packed with the Advantages of DSP.

LP5393 and LP5394 are low noise DC power supplies with an output noise voltage of 10 µVrms or less. Not only the circuit technology but also the shield structure inside the power supply enables the same level of low noise as a battery.

The LP series achieves not only low noise output, but also excellent temperature stability compared to general DC power supplies. It is suitable as a power supply for electric circuit which measures small signals that is usually affected by noise and voltage stability. Therefore it can be used as a DC power supply for a low noise preamplifier.

catch

catch

catch

Low Noise
Low Drift

10 µVrms or lower typ. (Bandwidth: 10 Hz to 20MHz)
±10 ppm/°C typ.

 

LP5393

LP5394

Output Noise

10 µVrms or lower (typ.)

Output Voltage Stability

±10 ppm/°C (typ.)

Voltage Setting Range

-

3 V, 5 V, 10 V or 15 V F.S.
(selectable)

Output Voltage (Dual)

±12 V to ±15 V

0 V to ±15 V
(Maximum voltage is the voltage range F.S.)

Voltage Adjustment

voltage output adjuster

Turns-counting Dial (up to 10 turns)

Output Current

0.1 A max.

LP5394

LP5394 is a low noise DC power supply with a wide voltage setting range.
It is suitable to use as power supplies for sensors and electric circuits that are affected by noise and voltage stability, such as a bias power supply for photodiodes.

LP5394
LP5394

Output Noise: 10 μVrms or lower (typ.)
(10 Hz to 20 MHz bandwidth)

Output Voltage Stability: ±10 ppm/°C (typ.)

Output Voltage: 0 to ±15 V

Output Current: 0.1 A max.

Voltage Setting Range:
3 V, 5 V, 10 V or 15 V F.S.

Voltage adjustment:turn-counting dial which counts up to 10 turns

1/4-rack size

LP5393

The LP5393 is suitable as a DC power supply for equipment that requires low noise output.
We recommended to use LP series for NF's low noise preamplifiers such as SA series.

LP5393
LP5393

Output Noise: 10 μVrms or lower (typ.)
(10 Hz to 20 MHz bandwidth)

Output Voltage Stability: ±20 ppm/°C (typ.)

Output Voltage: ±12 V to ±15 V

Output Current: 0.1 A max.

1/4-rack size

top of this page

Characteristics


Voltage Noise Density (Lp5394)

Time Drift (LP5394)

Temperature Drift (LP5394)

Output Voltage Waveform (15 V output) (LP5394)

Voltage Noise Density (LP5393)

top of this page




Front View for LP5394

Rear View of LP5293/LP5394