CR系列纹波电流测试器擎宏 IDRC

CR-2020
Ripple Frequency 纹波频率	20.00KHz~200.00KHz
Frequency Setup 频率设定	4 digital (指拨开关设定)
频率稳定率	±0.01%
Frequency Accuracy 频率精确度	±100Hz
温度系数	100ppM
Ripple Current 纹波电流	AC 8A MAX (rms)
Ripple Voltage 纹波电压	ACV 0 ~ 21 V (peak) 10转电位器调整
输出纹波电流上限设定	AC 0.3 ~8A MAX (rms) 15转半固定电位调整器
DC BIAS 直流偏压	0~50V (Max 100mA) 10转调整
直流偏压稳定率	± 0.1%
Time 计时器	0~9999 Hours / Minute 4位指拨设定,解析度 1 小时
Output Wave 波形	Sine Wave
Distortion (THD)(to 80KHz) 失真率	＜2% (400Hz) at Resistor Load
Protections Function 保护装置	Over Load, Short, Over Temp
Measurement Functions 量测功能	Resolution	Accuracy
4 Digital Frequency Meter 4 Digital Peak Voltage Meter 4 Digital True rms Current Meter 4 Digital DC Voltage Meter 4 Digital Time	0.01Hz/0.1Hz/1Hz Auto Range 0.01V 10mA 0.1V 1 Hours / Minute	± 0.1% ± 1C ± 1% ± 5C ± 1% ± 5C ± 1% ± 1C ± 1℃ ± 2C
Weight 重量	62Kg

一般规格:
Warm-Up time 暖机时间	1 hour
Cooling system 冷却系统	Forced air ~ cooling type(强制风冷)
Operating Temperature/Humidity 操作环境	0~+50℃/10~90%RH
Withstand Voltage 耐压	AC 2200V, 50/60Hz.1 Minute
Insulation Resistance 绝缘	10MΩ．500V DC
Input Power 输入电源	AC 110V/220V, 1Ø 2W, 50/60Hz (3KVA)
Dimension 体积	Chassis(9U):430x415x550mm(WxHxD) Largest Part 430x477(含轮子)x660(含前后手把)(WxHxD)
	机箱外观尺寸图	装箱材积表
Standard Accessories 标准附件	Power cord x 1 / Operator Manual x 1