Type 1840T     Transmitter  Measuring System

 

Main Functions

1.  Electret condenser microphone (ECM), or transmitter using ECM.

2.  Dynamic, Piezo and Ceramic transmitters.

3.  Type 1840T can be used to measure various general purpose microphones. Please note that the measured results (including sensitivity and frequency response) are refer to the condition of  “Near Field”  (35 mm from the artificial mouth). These results may differ slightly from those measured under far field condition. The later condition is often used to specify the characteristics of general purpose microphones. It is proposed to use 1600M for the measurement of general purpose microphones. The measured results are refer to far field condition.

1840T can test speedy the frequency response, 1kHz sensitivity characteristics of the aforementioned transmitter.


| Catalogue | Example of Testing Screen |


The fundamental combination of Type 1840T 

Item

Model No.

Description

Usage

1.

184

 Electro acoustic Analyzer

Mainframe. To control  and process the inputoutput signal.

2.

Monitor & Keyboard

High Resolution Color Display Monitor & Keyboard

Display the tested results & data and key in data. User may buy these two items at his local market, since price is cheaper and can save freight charge and import tax.

3.

140 M

Artificial Mouth 

Generates a flat and stableprecise sound field, for testing the  Transmitter".

4.

ETF - 1

Transmitter Test Fixture

Used to position the artificial mouth, to test the  transmitter and condenser microphone.

5.

186

( Option )

Sorting Driver

Please refer to Note 1 as below.

6.

X-Y Mouse

Mouse

Replace the upward, downward, leftward, rightward and enter keys on the keyboard.

7.

HP Printer

( Option)

Printer (All the HP DeskJet or HP Laser Printers that are supported by DOS can all be used.)

Print out the tested results & data.

Note :

1. Model-186  Sorting Driver   when combined for use with Model – 160A ( or Model – 184 ) mainframe and user’s automatic sorting machine, can perform the automatic sorting which totally can be divided into 14 ranks. The sensitivity sorting is divided into 12 ranks (which are the same as the number of rank for the sensitivity sorting on the testing screen); Frequency response ranked at 13th , while  the other testing items, like : The impedance, distortion, ECM current etc. of the unqualified items ranked at 14th (When the indicators  of the  1st~13th rank  did not light up, it belongs to 14th rank). Model-186 is very suitable for use in the automation for the receiver, transmitter and microphone factories.

2. The items that can be tested by 1840T is much more lesser than Type 1600T does, it can only test the frequency response curve and sensitivity of the receiver, but its test speed is faster.


Products list | brand | Model No. | Home